XH-400 10.1-Inch Mobile Biometric Tablet
A 10.1-inch mobile biometric Android tablet sealed to IP65, with a native RJ45 port, optional fingerprint sensor and ID card reader, and a 10,000 mAh pack — a 10-inch Android tablet that works on benches, vehicles and kiosks where WiFi cannot be trusted and dust or water spray is part of the day.
Wired RJ45 Ethernet plus USB-A, USB Type-C and a DC 3.5 mm charging port.
10,000 mAh rechargeable polymer battery with a charging indicator.
MTK6765 64-bit octa-core up to 2.3 GHz, Android 10 or 11 with GMS certification.
Optional NFC, ID card reader, fingerprint sensor or 2D barcode engine.
Specifications
| Design | 300 × 183 × 18 mm, 880 g, black or white housing |
| Ingress protection | IP65 — dust tight, protected against low-pressure water jets |
| Display | 10.1-inch HD IPS, 800 × 1280 standard, 1920 × 1200 optional; COF touchscreen with Goodix GT9110 touch IC, optional Corning glass |
| Platform | MTK6765 64-bit octa-core, 12 nm process, up to 2.3 GHz |
| Operating system | Android 10.0 or Android 11.0 with GMS certification |
| Memory | 4 GB RAM, up to 6 GB; 64 GB storage (32 GB or 128 GB optional); SD/TF card up to 512 GB |
| Cameras | Front 5 MP; rear 13 MP with autofocus and dual-tone flash |
| Battery and power | 10,000 mAh rechargeable polymer battery, DC or USB Type-C charging with charging indicator; adapter input AC 100–240 V 50–60 Hz, output DC 5 V 2 A |
| Wireless | Dual-band WiFi 2.4 GHz + 5 GHz, 802.11 a/b/g/n/ac; Bluetooth 5.0; FM radio |
| Cellular | GSM 850/900/1800/1900 MHz; WCDMA Bands 1/2/4/5/8; TD-SCDMA Bands 34/39; CDMA2000; TDD-LTE Bands 34/38/39/40/41; FDD-LTE Bands 1/2/3/4/5/6/7/8/28 |
| Positioning | BeiDou, Galileo, GPS and GLONASS |
| Sensors | Gravity, orientation, accelerometer, gyroscope, geomagnetic sensor, compass |
| Audio | Dual 0.8 W speakers; dual microphones with noise reduction |
| External interfaces | RJ45 Ethernet × 1, USB-A × 1, USB Type-C × 1, DC 3.5 mm charging port × 1, reset pinhole × 1, hybrid SIM/TF tray × 1 (two of three cards at a time), microphones × 2 |
| Internal interfaces | USB × 3, TTL serial × 2, GPIO × 3, SPI × 1, 2D scan engine FPC × 1 — for integrators building custom peripherals |
| Optional modules | NFC ST21NFC at 13.56 MHz (ISO/IEC 14443 Type A/B, ISO/IEC 15693); second-generation Chinese ID card reader, offline with optional online version; fingerprint FAP10 capacitive or FAP20/FAP30 optical (Slim2/Slim3); rear 2D scan engine from Newland N1/3296/3596, Honeywell N3680 or Zebra 4710 |
| Packaging | Contents: tablet, 5 V / 2 A charger, user manual, data cable. Retail box 390 × 215 × 50 mm, packaged unit 1.3 kg; outer carton 410 × 280 × 415 mm, gross weight 13.8 kg |
Where the XH-400 fits
Production lines and fixed workstations: the native RJ45 port keeps data flowing where WiFi is congested, and IP65 sealing handles the dust and wash-down that a production floor produces.
Vehicles and forklifts: 880 g with a 300 × 183 mm body mounts cleanly on a RAM arm, and the 10,000 mAh pack plus DC charging suits long shifts on a vehicle power supply.
Identity and enrolment counters: combine the offline ID card reader with a fingerprint sensor and face-capable camera work flow, and the tablet becomes a single-window registration station that does not depend on network quality.
Warehouse receiving and dispatch: add the rear 2D engine from Newland, Honeywell or Zebra and use the same unit for bin labels, waybills and returns.
Integrators: internal USB, TTL serial, GPIO and SPI headers are exposed inside the housing, so custom peripherals can be wired without external adapters.
OEM / ODM, factory direct
Module selection, memory tier, display resolution, Android version, housing colour, boot logo, pre-installed applications and packaging are all decided before the line starts. We can also match LTE bands and charger plugs to your destination market.
Fingerprint module selection
Fingerprint capture is optional. Confirm the selected sensor model, active area, SDK output formats and any required certification for your hardware and software configuration. Our FAP 10, FAP 20 and FAP 30 guide explains the single-finger capture profiles and the questions to check before ordering. For enrolment at temporary or mobile stations, see our mobile voter registration guide.
Ordering information
MOQ is 2 units, a sample is built in about 3 days and mass production runs about 25 days. Figures move when the XH-400 leaves its standard build — biometric module, RAM tier or vehicle mount — and those are quoted in writing before you order.
| MOQ | 2 units. One mounted at a fixed workstation and one for the forklift or vehicle trial — the two installations that usually need checking first. |
| Sample | Sample build and dispatch take about 3 days, after which the tablet is checked against the acceptance criteria agreed with you — biometric module and mount fit included — before mass production starts. |
| Lead time | About 25 days from sample approval to shipment for the configuration and quantity on your order. Workstation and vehicle installation checks are part of the written schedule issued before the first sample is built. |
| SDK and documentation | API and SDK support for the modules fitted to your build — biometric capture, NFC or 2D imager — plus the agreed specification sheet. Integration formats for your workstation software are confirmed before the order is placed. |
| Certification | The Android 10 and Android 11 builds both ship with GMS certification, and the fingerprint module holds Ministry of Public Security certification where fitted. Market-specific approvals are agreed before production so the test plan fits the schedule. |
| Packaging | Retail box contents and carton dimensions are in the specification above; pallet quantities and incoterms are agreed with the order. Mounting hardware for workstations or vehicles is packed to match the installation plan. |
Request a quote
Send the installation type, the modules you need, the quantity and your target date — we reply with the configuration, the sample plan and the price in writing.